The query has to be between 2 and 50 characters
Advertisement
Advertisement

Current catalogue Bunnings Warehouse - Valid from 01.11 to 30.11 - Page nb 82

Advertisement
Advertisement
Advertisement
Advertisement
Catalogue Bunnings Warehouse 01.11.2022 - 30.11.2022
Advertisement
Advertisement
Advertisement

Products in this catalogue

MULTIPURPOSE SIDE TABLE Inventively created from an affordable timber panel and dowel, this cute cube can be used as a bedside or side table. Or build two and stack them as a bookcase or display unit! 1 Mark up a 1200mm x 300mm timber panel 395mm in from either end to cut the side pieces with a mitre saw. The remaining centre piece is the top. Cut a 25mm dowel piece to 375mm long. Tip: Alternatively, arrange to have the pieces cut in store. 3On the top piece, use a combination square to mark a line 9mm in from the ends to countersink holes 30mm from the edges and at the centre. Position the top flush with the sides to pre-drill the upper edges of the sides with a 3mm bit. Tip: Mark Countersink the holes from See a meu ae CT eB lee ’ Eee the top so it repositions over the same holes. Tools & materials a, ™ Safety equipment (gloves, mask, 1200mm x 300mm x 18mm ear and eye protection) timber panel* ™ Tape measure and pencil @ 1.2m (or offcut) 25mm dowel* @ Mitre saw ™@ 8G x 40mm timber screws & Drill with driver, 8G combination ™ Woodworking adhesive ™ 180-grit abrasive paper ™ Combination square with sanding block @ Four 450mm clamps @ Timber filler ina @ Cloth hardwood tint 5 Sand over the screws with 180-grit abrasive paper ™ Scraper ™ Clear water-based satin to remove any breakout from the countersinking. Use & Mini roller with tray finish varnish a scraper to smooth filler into the holes and leave to dry. Tip: Choose a tinted filler to match the timber. 10zito 2100W 254mm 10" corded double bevel sliding mitre saw, $299, I/N: 6290588. 2 Bondall ‘Monocel’ waterbased clear wood varnish in Satin, $12.69/250ml, I/N: 0079566. 3 Empire 300mm combination square, $26.99, I/N: 5667081. 4 Porta 25.4mm Tasmanian oak select dowel, $16.20/1.2m, I/N: 0099506°. 5 Specrite 1200mm. x 300mm 18mm laminated hevea FJ timber panel, $28, I/N: 8330183*. 6 Craftright 450mm quick action clamp, $21.60/pack of 2, 1/N: 5860151. Some products are not available at all Bunnings stores, but may be ordered. 82 bunnings.com.au | (©) bunnings | () bunnings

Latest catalogues

Advertisement
MULTIPURPOSE SIDE TABLE Inventively created from an affordable timber panel and dowel, this cute cube can be used as a bedside or side table. Or build two and stack them as a bookcase or display unit! 1 Mark up a 1200mm x 300mm timber panel 395mm in from either end to cut the side pieces with a mitre saw. The remaining centre piece is the top. Cut a 25mm dowel piece to 375mm long. Tip: Alternatively, arrange to have the pieces cut in store. 3On the top piece, use a combination square to mark a line 9mm in from the ends to countersink holes 30mm from the edges and at the centre. Position the top flush with the sides to pre-drill the upper edges of the sides with a 3mm bit. Tip: Mark Countersink the holes from See a meu ae CT eB lee ’ Eee the top so it repositions over the same holes. Tools & materials a, ™ Safety equipment (gloves, mask, 1200mm x 300mm x 18mm ear and eye protection) timber panel* ™ Tape measure and pencil @ 1.2m (or offcut) 25mm dowel* @ Mitre saw ™@ 8G x 40mm timber screws & Drill with driver, 8G combination ™ Woodworking adhesive ™ 180-grit abrasive paper ™ Combination square with sanding block @ Four 450mm clamps @ Timber filler ina @ Cloth hardwood tint 5 Sand over the screws with 180-grit abrasive paper ™ Scraper ™ Clear water-based satin to remove any breakout from the countersinking. Use & Mini roller with tray finish varnish a scraper to smooth filler into the holes and leave to dry. Tip: Choose a tinted filler to match the timber. 10zito 2100W 254mm 10" corded double bevel sliding mitre saw, $299, I/N: 6290588. 2 Bondall ‘Monocel’ waterbased clear wood varnish in Satin, $12.69/250ml, I/N: 0079566. 3 Empire 300mm combination square, $26.99, I/N: 5667081. 4 Porta 25.4mm Tasmanian oak select dowel, $16.20/1.2m, I/N: 0099506°. 5 Specrite 1200mm. x 300mm 18mm laminated hevea FJ timber panel, $28, I/N: 8330183*. 6 Craftright 450mm quick action clamp, $21.60/pack of 2, 1/N: 5860151. Some products are not available at all Bunnings stores, but may be ordered. 82 bunnings.com.au | (©) bunnings | () bunnings
Advertisement
Advertisement

If you continue to browse this website, you accept the use of cookies.

Name Details