The query has to be between 2 and 50 characters
Products in this catalogue
PROTECTING WHAT MATTERS Working on a drop sheet, 2 Position mosaics on the base seal an MDF serving tray using _of the tray, cutting the mesh small 38mm brush to apply with a utility knife to remove two coats of water-based tiles that don't fit and using enamel paint, leaving to dry the offcuts to fill any gaps. after each coat. Tip: Paint Tape over loose tiles to keep underneath first, leave it to dry, the pattern while flipping them then finish the top and sides. out onto the drop sheet. ry ss a ai 3 Run 48mm-wide masking 4 Press the tiles into place and tape around the inside of the squeeze more adhesive-and- tray, about 12mm up from. grout mix over the surface. the base, to keep the sides Working in one direction only, clean. Spread a 10mm-deep. smooth it into the gaps and layer of combination around the edges with a small adhesive-and-grout mix rubber squeegee. Leave it to over the base of the tray firm up for 15 minutes. with a small notched trowel. . "48 5 Remove excess grout with 6 Polish the tiles with a clean, adamp sponge, continually dry cloth to remove the grout rinsing it in a bucket of clean haze that forms. Apply two water and wringing to remove _—_ even coats of tile and grout excess. Remove masking tape _ sealer, leaving to dry thoroughly and leave to dry overnight. after each coat. Tip: Using For more information visi Tip: Avoid catching grout in the an aerosol application www.RapidFence.com.au gaps by wiping in one direction ensures a protective finish only until the tiles are clean. that dries quickly. Keep in mind... ™ When using aerosols, work in a well-ventilated area and wear mask and gloves. ™ After applying paint, use plastic wrap to seal the brush between coats and prevent it from drying out. = Do not place food directly on the sealed tiles; always use a platter or plate q 1 facebook @rapidfenceaustralia @rapidfence
| Name | Details |
|---|
