Products in this catalogue
ake a box-like frame and clad it in fence panels, reinvented as ready-made screening for a well-ventilated bin stable. Simply finish them with an oil-based primer and exterior paint to suit your colour scheme (we chose white for a coastal look). These instructions are for housing three large wheelie bins, with the finished structure 2210mm wide, 915mm deep and 1260mm high. To tweak the design for outdoor objects that don't need moving, but still require access, replace the doors or lid with fixed panels, working out the dimensions around the original 600mm panel width to keep the slats intact. Tools & materials ™ Safety equipment (gloves, mask, ear and eye protection) ™ Tape measure and pencil & Mitre saw ® Drill with #2 square-drive bit, 2.5mm, 3mm and 5mm drill bits, 8G combination countersinking bit @ Circular saw @ Rafter square @ Impact driver with driver and 5mm hex driver bit = 50mm angled brush § Mini roller with spare covers and tray ™ 8G x 20mm galvanised button head screws @ Six 600mm x 1800mm x ™ 8G x 50mm stainless steel rib head decking screws ™ 14G x 75mm galvanised bugle head batten screws ™ 8G x 30mm galvanised timber screws ®@ 120-grit abrasive paper ™@ Exterior timber filler all-purpose primer @ Exterior low sheen paint @ Nine 85mm x 60mm stainless steel fixed-pin hinges @ Three 75mm stainless steel cabin hooks & Two pairs of ball end strut brackets 33mm pre-oiled merbau fence panels 1 Two 700mm gas struts CUTTING LIST ™@ Using a mitre saw, from five 6m lengths of 70mm x 35mm H3-treated pine, cut one 2180mm and two 2140mm rails, eight 120mm stiles (vertical pieces), 12 rails 830mm long, and three 621.5mm spacers. @ From three 2.7m lengths of 42mm x 18mm primed H3- treated pine, cut a 2180mm support rail, 12 infills 235mm. long and two 310mm end cover pieces. ™@ From two 2.7m lengths of 66mm x 18mm primed H3-treated pine, cut two 2120mm and two 280mm lid supports. mation, Paint colours may vary on application. © 6Remteep7 Hi ° 1 Ryobi ‘One+’ 18V 165mm circular saw, $149/skin only (battery and charger sold separately), I/N: 6210595. 2 Empire ‘True Blue’ 180mm. laser etcher rafter square, $26.98, I/N: 0154654. 3 Zenith 8G x 50mm stainless steel type 17 countersunk rib head decking screws, $75/pack of 500, I/N: 2410148, 4 Austyle 85mm x 60mm x 2.5mm 304 grade stainless steel fixed pin hinge, $4.87, I/N: 0119742. 5 Pinnacle 75mm. stainless steel cabin hook, $11.91, I/N: 4080515. 6 Dulux ‘Prepcoat 1Step' oil based primer, sealer and undercoat in White, $35:90/500ml, IN: 1371240. 7 Dulux ‘Weathershield’ low sheen exterior paint in Vivid White, $6690/2L, I/N: 0144761. 8 SpecRite 600mm x 33mm x 1.8m pre oiled merbau fence panel, $89, I/N: 8500298". 9 Goliath 700mm 650N gas strut in Black, $19.73, I/N: 4230059. Some products are not available at all Bunnings stores, but may be ordered. ry. contact your local store fo “Timbers vary by state and bunnings.com.au | (6) bunnings | (®) bunnings 75
| Name | Details |
|---|
